In the use of forklift we need to judge the damage degree of parts, to identify the impact of forklift in use, so what method can be used to judge the damage of parts?
1, the impact on the performance and operating mechanism: after some parts wear, although also can complete the use function, but reduces the performance, such as gear after wear still can pass a predetermined torque and speed, but because of the gap is too big, higher noise, low efficiency, the transmission stability is destroyed, it must be determined according to the degree of wear and tear to repair or replacement.
2, the impact on efficiency: when parts wear, it will reduce efficiency.
If the cylinder and other parts’ wear will affect the engine’s efficiency, it should be based on the specific situation of wear to decide whether to repair some parts.
3, the wear degree of general parts has exceeded the tolerance, but not more than the next level of tolerance can continue to use.
4. Economy of parts repair method: On the premise of guaranteeing repair quality, the ratio of repair cost to service life after the repair is lower than that of manufacturing (or outsourcing) cost to the service life of new parts after replacement.
5, parts due to wear and tear and can not complete the scheduled use of function, such as the clutch loss of power transmission, hydraulic parts can not reach the predetermined pressure. The CAM gas distribution system can not maintain the scheduled law of motion, such as the occurrence of the above situation. It must be replaced or repaired.
6, according to the forklift maintenance process, to repair the worn parts of the technical ability and conditions to determine repair or replacement.
I hope this blog is helpful. Please click here for more about our forklift parts.